套件：flashrom（1.0-1）
Identify, read, write, erase, and verify BIOS/ROM/flash chips
flashrom is a tool for identifying, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware/optionROM images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips.
It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32/40/48, and BGA chips, which use various protocols such as LPC, FWH, parallel flash, or SPI.
The tool can be used to flash BIOS/firmware images for example -- be it proprietary BIOS images or coreboot (previously known as LinuxBIOS) images.
It can also be used to read the current existing BIOS/firmware from a flash chip.
Currently supported programmers include:
* internal (for in-system flashing in the mainboard)
* dummy (virtual programmer for testing flashrom)
* nic3com (for flash ROMs on 3COM network cards)
* nicrealtek (for flash ROMs on Realtek and SMC 1211 network cards)
* nicnatsemi (for flash ROMs on National Semiconductor DP838* network cards)
* nicintel (for parallel flash ROMs on Intel 10/100Mbit network cards)
* gfxnvidia (for flash ROMs on NVIDIA graphics cards)
* drkaiser (for flash ROMs on Dr. Kaiser PC-Waechter PCI cards)
* satasii (for flash ROMs on Silicon Image SATA/IDE controllers)
* satamv (for flash ROMs on Marvell SATA controllers)
* atahpt (for flash ROMs on Highpoint ATA/RAID controllers)
* atavia (for flash ROMs on VIA VT6421A SATA controllers)
* atapromise (for flash ROMs on Promise PDC2026x ATA/RAID controllers)
* it8212 (for flash ROMs on ITE IT8212F ATA/RAID controller)
* ft2232_spi (for SPI flash ROMs attached to an FT2232/FT4232H/FT232H family
based USB SPI programmer), including the DLP Design DLP-USB1232H,
FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi,
Amontec JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster,
Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, TIAO/DIYGADGET USB
Multi-Protocol Adapter (TUMPA), TUMPA Lite, GOEPEL PicoTAP,
Google Servo v1/v2, and FIC OpenMoko Neo1973 Debug board.
* serprog (for flash ROMs attached to a programmer speaking serprog),
including AVR flasher by Urja Rannikko, AVR flasher by eightdot,
Arduino Mega flasher by fritz, InSystemFlasher by Juhana Helovuo,
and atmegaXXu2-flasher by Stefan Tauner.
* buspirate_spi (for SPI flash ROMs attached to a Bus Pirate)
* dediprog (for SPI flash ROMs attached to a Dediprog SF100)
* rayer_spi (for SPI flash ROMs attached to a RayeR parport based programmer)
* pony_spi (for SPI flash ROMs attached to a SI-Prog serial port
bitbanging adapter)
* nicintel_spi (for SPI flash ROMs on Intel Gigabit network cards)
* ogp_spi (for SPI flash ROMs on Open Graphics Project graphics card)
* linux_spi (for SPI flash ROMs accessible via /dev/spidevX.Y on Linux)
* usbblaster_spi (for SPI flash ROMs attached to an Altera USB-Blaster)
* nicintel_eeprom (for SPI EEPROMs on Intel Gigabit network cards)
* mstarddc_spi (for SPI flash ROMs accessible through DDC in MSTAR-equipped
displays)
* pickit2_spi (for SPI flash ROMs accessible via Microchip PICkit2)
* ch341a_spi (for SPI flash ROMs attached to WCH CH341A)
其他與 flashrom 有關的套件
|
|
|
|
-
- dep: libc6 (>= 2.14) [amd64]
- GNU C 函式庫：共用函式庫
同時作為一個虛擬套件由這些套件填實： libc6-udeb
- dep: libc6 (>= 2.17) [arm64]
- dep: libc6 (>= 2.28) [armhf, i386]
-
- dep: libftdi1-2 (>= 1.2)
- Library to control and program the FTDI USB controllers
-
- dep: libpci3 (>= 1:3.5.2-1)
- Linux PCI Utilities (shared library)
-
- dep: libusb-0.1-4 (>= 2:0.1.12)
- userspace USB programming library
-
- dep: libusb-1.0-0 (>= 2:1.0.9)
- userspace USB programming library