软件包：setserial（2.17-55）

[ 源代码： setserial  ]

controls configuration of serial ports

Set and/or report the configuration information associated with a serial port. This information includes what I/O port and which IRQ a particular serial port is using.

This version has a completely new approach to configuration, so if you have a setup other than the standard ttyS0 and 1, you will have to get your hands dirty.

By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4. If you have other serial ports (such as an AST Fourport card), or if you have mapped the IRQs differently (perhaps COM3 and 4 to other IRQs to allow concurrent access with COM1 and 2) then you must have this package.

标签: 系统管理: 设置工具, 硬件支持, 硬件相关: hardware::detection, interface::commandline, 角色: 程序, 范围: 实用程序, Purpose: 设置

其他与 setserial 有关的软件包

• dep: debconf (>= 0.5)

  Debian 配置管理系统

  或者 debconf-2.0

  本虚包由这些包填实： cdebconf, cdebconf-udeb, debconf

• dep: libc6 (>= 2.34)

  GNU C 语言运行库：共享库
  同时作为一个虚包由这些包填实： libc6-udeb

• dep: lsb-base (>= 3.0-6)

  Linux 标准规范初始化脚本功能的过渡软件包

下载 setserial

下载可用于所有硬件架构的

硬件架构	软件包大小	安装后大小	文件
s390x	33.4 kB	99.0 kB	[文件列表]