软件包：libflashrom1（1.3.0-2.1）
Identify, read, write, erase, and verify BIOS/ROM/flash chips - library
flashrom is a tool for identifying, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware/optionROM images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips.
It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32/40/48, and BGA chips, which use various protocols such as LPC, FWH, parallel flash, or SPI.
The tool can be used to flash BIOS/firmware images for example -- be it proprietary BIOS images or coreboot (previously known as LinuxBIOS) images.
It can also be used to read the current existing BIOS/firmware from a flash chip.
This package provides flashrom library development files.
其他与 libflashrom1 有关的软件包
|
|
|
|
-
- dep: libc6 (>= 2.33)
- GNU C 语言运行库：共享库
同时作为一个虚包由这些包填实： libc6-udeb
-
- dep: libftdi1-2 (>= 1.2)
- C Library to control and program the FTDI USB controllers
-
- dep: libjaylink0 (>= 0.3.1)
- library for interacting with J-Link programmers
-
- dep: libpci3 (>= 1:3.8.0)
- PCI 组件（共享库）
-
- dep: libusb-1.0-0 (>= 2:1.0.22)
- userspace USB programming library