all options
[  bullseye  ] [  bullseye-backports  ] [  bookworm  ] [  bookworm-backports  ] [  trixie  ] [  sid  ]
[ Source: nagios-plugins-contrib  ]

Пакунок: monitoring-plugins-contrib (45.20231212~bpo12+1)

Links for monitoring-plugins-contrib

Screenshot

Debian Resources:

Download Source Package nagios-plugins-contrib:

Maintainers:

Similar packages:

Plugins for nagios compatible monitoring systems

This package provides various plugins for Nagios compatible monitoring systems like Nagios and Icinga. It contains the following plugins: 

  * check_ajp (1): plugin to monitor the AJP ping response time
    Should work with all application servers (Tomcat, JBoss,....)
    which provide an AJPv13 connector.
  * check_backuppc (1.1.0): plugin for checking on the status of
    BackupPC backups
  * check_bgpstate (1.0): plugin to check all BGP session on Cisco routers
  * check_checksums (20130611): plugin to verify file checksums
    against (local, not 100% secure) lists.
    Supports md5 sha1 sha224 sha256 sha384 sha512 checksums.
  * check_chrony (0.1): chrony NTP server check
    This plugin is able to check the stratum time difference of a local
    chronyd instance.
  * check_clamav (1.2): plugin to check for clamav signature freshness
    This script is used to compare the version and signature
    level of the currently running clamd daemon with the latest
    available versions listed in the TXT record for
    current.cvd.clamav.net.
  * check_cups (0.2): plugin to check queues on a remote CUPS server
    This plugin is monitoring of queues on a remote CUPS server,
    which means that it doesn't need to be installed on the print
    server and run via NRPE.
  * check_debsecan (1.0.0): plugin to check the Debian CVE lists against your installed packages
  * check_drbd (0.5.3): plugin to check DRBD device states
    This plugin is for checking DRBD device states. It parses the
    /proc/drbd device and analyses the output.
  * check_email_delivery (0.7.1b): plugin to monitor email delivery
    Some typical uses of this plugin include:
      - check SMTP server
      - check messages and quota on IMAP server
      - check email delivery loop
      - check auto-responder function
      - keep an eye on email lag
      - monitor automated mailboxes
      - check email-to-FTP or other special email gateways
  * check_etc_hosts (?): plugin to check /etc/hosts for DNS consistency
    Check /etc/hosts, and make sure the content matches the information
    in DNS.  Lookup IP, and check if the names listed in /etc/hosts
    maches the one in DNS.  It will ignore entries with '# NAGIOSIGNORE'
    at the end.
  * check_etc_resolv: plugin to check /etc/resolv.conf
    Check /etc/resolv.conf, and make sure the name servers listed are
    working.  It will ignore entries with '# NAGIOSIGNORE' at the end.
  * check_graphite: Plugin to monitor graphite metrics
  * check_haproxy (rev135): plugin to check the HAProxy statistics url
  * check_haproxy_stats (1.1.3): check haproxy via admin socket
    Different from check_haproxy this plugin is able to check
    haproxy via the unix admin socket.
  * check_hp_bladechassis (1.0.1): plugin to check the hardware health of
    HP blade enclosures via SNMP.
    The plugin is only tested with the c7000 enclosure.
  * check_hpasm (4.8.0.2): plugin to check the hardware health of
    HP Proliant Servers
    It either uses snmp or - if installed - the hpasm package locally.
    The plugin checks the health of
      * Processors
      * Power supplies
      * Memory modules
      * Fans
      * CPU- and board-temperatures
      * Raids
    and alerts you if one of these components is faulty or operates
    outside its normal parameters.
  * check_httpd_status (rev204): plugin checking Apache or lighttpd
    server-status page (using mod_status)
  * check_ipmi_sensor (3.14): IPMI Sensor Monitoring Plugin
    Plugin to monitor the hardware status (fan speed, temperaturs,
    voltages, power usage, ...) of a server using IPMI.
  * check_libs_ng (0.1.0): plugin to report processes using outdated libraries
     depents on kernel features present in kernels newer than 3.3
  * check_libvirt (v7.0.3): monitor virtualization solutions using libvirt
  * check_lm_sensors (4.1.1): plugin to monitor hardware sensors
    and disk temperatures
  * check_memcached (1.3): plugin to check memcached instances
    It will give a critical message if a partiular memcached host is
    inaccessible and generate a warning if the hit/miss ratio falls
    below a given threshold or the number of evictions exceeds a given
    limit.
    Hit/miss and evictions are measured over a 30 minute interval,
    using a memcached object to store the earlier statistics.
  * check_mongodb (1b54df0): Plugin script to monitor your MongoDB server(s)
  * check_multipath (0.4.12): plugin to monitor the number of available and
    failed paths of multipath devices
  * check_mysql_health (2.2.2): plugin to check various parameters of a
    MySQL database
  * check_nfsmounts: checks whether there are stale NFS mounts on the host
  * check_printer: plugin to check printer supply levels using SNMP
    It outputs performance data for all supplies
    found, for example toner and drum.
  * check_printer_health (1.1.0.2): plugin which checks the health of snmp-enabled printers
  * check_raid (4.0.9): plugin to check sw/hw RAID status
    The plugin looks for any known types of RAID configurations,
    and checks them all.
    Supports:
    - Adaptec AAC RAID via aaccli or afacli or arcconf
    - AIX software RAID via lsvg
    - HP/Compaq Smart Array via cciss_vol_status (hpsa supported too)
    - HP Smart Array Controllers and MSA Controllers via hpacucli
    - HP Smart Array (MSA1500) via serial line
    - Linux 3ware SATA RAID via tw_cli
    - Linux Device Mapper RAID via dmraid
    - Linux DPT/I2O hardware RAID controllers via /proc/scsi/dpt_i2o
    - Linux GDTH hardware RAID controllers via /proc/scsi/gdth
    - Linux LSI MegaRaid hardware RAID via CmdTool2
    - Linux LSI MegaRaid hardware RAID via megarc
    - Linux LSI MegaRaid hardware RAID via /proc/megaraid
    - Linux MegaIDE hardware RAID controllers via /proc/megaide
    - Linux MPT hardware RAID via mpt-status
    - Linux software RAID (md) via /proc/mdstat
    - LSI Logic MegaRAID SAS series via MegaCli
    - LSI MegaRaid via lsraid
    - Serveraid IPS via ipssend
    - Solaris software RAID via metastat
    - Areca SATA RAID Support via cli64/cli32
    - Detecting SCSI devices or hosts with lsscsi
  * check_rbl (1.7.1): plugin to check if a server is blacklisted
  * check_redis (0.73): Redis Server check plugin
    This plugin checks Redis NoSQL database status variables,
    measures its response time and if specified allows one to set thresholds
    on one or more key data. You can set thresholds for data in stats
    variables and some of them are also conveniently available as long options
    with special threshold syntax. Plugin also calculates statistics such as
    Hitrate (calculated as rate of change of hits/misses) and memory use and
    can check replication delay.
  * check_smstools: plugin to check GSM Modems using smstools
    check_smstools is a plugin to monitor a GSM modem
    signal quality and registration status with smstools.
  * check_snmp_environment (0.7): plugin to check various hardware statuses
    Using snmp the plugin is able to retrieve Fan, power-supply,
    voltage, temperature, card and module status and various other
    information from Cisco, Nokia, Blue Coat, IronPort,
    Foundry Network, Linux (using lm-sensors), Extreme Networks,
    Juniper Networks, HP ProCurve, Netscreen, Citrix NetScaler
    and Transmode Systems hardware.
  * check_snmp_time (1.1): plugin to check the time on a server using SNMP
    This plugin queries the remote systems time through SNMP and compares
    it against the local time on the Nagios server. This identifies systems
    with no correct time set and sends alarms if the time is off to far.
    HOST-RESOURCES-MIB::hrSystemDate.0 used here returns 8 or 11 byte octets.
    SNMP translation needs to be switched off and to be converted the
    received SNMP data into readable strings.
  * check_ssl_cert (2.70.0): plugin to check the CA and validity of an
    X.509 certificate
  * check_uptime (0.521): check_uptime returns uptime of a system
    in text (readable) format as well as in minutes for performance graphing.
    The plugin can either run on a local unix system (using 'uptime' command)
    or check remote system by SNMP. Also it is able to report one CRITICAL
    or WARNING alert if system has been rebooted since last check.
  * check_v46 (2013-08-26T07:33:11Z): ipv4/ipv6 Nagios plugin wrapper
    Nagios plugin wrapper for running the actual plugin for both / either of
    IPv6 and/or IPv4.  The worst result of the actual plugin runs will be
    the wrapper return value, that is, result will be OK only if all checks
    returned OK.  Compatible with any plugin with standard command line options
    -6/-4.
  * check_webinject (1.80): plugin for testing web services
    It uses the WebInject Perl module for automated testing of
    web applications and web services. It can be used to check
    individual system components that have HTTP interfaces
    (JSP, ASP, CGI, PHP, AJAX, Servlets, HTML Forms,
    XML/SOAP Web Services, REST, etc).
  * check_whois (1.24): plugin to check for the expiration of a domain.
    The plugin may not yet work with all registrars, since their
    output formats differ or there is no expiration date in the
    whois output.
  * check_zone_auth (1.14): plugin to ensure that the authoritative nameservers
    for a given zone remain in sync.
  * check_zone_rrsig_expiration (1.14): plugin to check for expiration of
    signatures in dnssec-enabled zones.
  * dsa (2300473): plugins from the Debian System Administrators
    nagios plugins repository.
    * check_cert_expire: check for certificate expiration
      using openssl on the certificate file
    * check_cert_expire_dir: checks if any of the *.crt files in
      a directory on disk will expire soon
    * check_dnssec_delegation: check for correct DNSSEC
      delegation
    * check_entropy: check if there is enough entropy available.
    * check_packages: replacement for check_apt; needs a cronjob
      to update the apt database regularly
    * check_running_kernel: check if a system was rebooted after
      a kernel upgrade
    * check_soas: check SOA records
    * check_statusfile: deliver the content of a status file
      as check result
  * extras (1): various scripts and extras
    Not a plugin, but a collection of various useful
    event/obsession handlers and similar scripts.
  * madrisan-nagios-plugins-linux (bbbdc5279cd2569d4c6b5e0ed19d12c082e322ad): Nagios-compatible Plugins for Linux
    Various binary plugins for monitoring (physical and virtual) Linux hosts with
    Nagios and Nagios-compatible monitoring systems like Icinga and Naemon:
     * check_clock: returns the number of seconds elapsed between
       the host local time and Nagios time.
     * check_cpu: checks the CPU (user mode) utilization
     * check_cpufreq: displays the CPU frequency characteristics.
     * check_cswch: monitors the total number of context switches across all CPUs.
     * check_fc: monitors the status of the fiber status ports.
     * check_ifmountfs: checks whether the given filesystems are mounted.
     * check_intr: monitors the total number of system interrupts.
     * check_iowait: checks I/O wait bottlenecks
     * check_memory: checks the system memory utilization.
     * check_nbprocs: displays the number of running processes per user.
     * check_network: displays some network interfaces statistics, including:
       check_network_collisions, check_network_dropped, check_network_errors, check_network_multicast
     * check_paging: checks the memory and swap paging.
     * check_pressure: checks Linux Pressure Stall Information (PSI) data.
     * check_readonlyfs: checks for readonly filesystems.
     * check_tcpcount: displays TCP network and socket informations.
     * check_temperature: monitors the hardware's temperature.
  * percona-nagios-plugins (1.1.8): Percona Monitoring Plugins (nagios)
    Nagios MySQL Monitoring plugins writting/provided by Percona.

Some scripts and binaries need more packages installed to work, which is implemented as recommends.

Інші пакунки пов'язані з monitoring-plugins-contrib

  • depends
  • recommends
  • suggests
  • enhances

Завантажити monitoring-plugins-contrib

Завантаження для всіх доступних архітектур
Архітектура Розмір пакунка Розмір після встановлення Файли
arm64 607.9 kB4,441.0 kB [список файлів]