Paquet : libflashrom1 (1.4.0-3) [debports]

[ Paquet source :  ]

Identify, read, write, erase, and verify BIOS/ROM/flash chips - library

flashrom is a tool for identifying, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware/optionROM images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips.

It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32/40/48, and BGA chips, which use various protocols such as LPC, FWH, parallel flash, or SPI.

The tool can be used to flash BIOS/firmware images for example -- be it proprietary BIOS images or coreboot (previously known as LinuxBIOS) images.

It can also be used to read the current existing BIOS/firmware from a flash chip.

This package provides flashrom library development files.

Autres paquets associés à libflashrom1

• dep: libc6 (>= 2.33)

  bibliothèque C GNU : bibliothèques partagées
  un paquet virtuel est également fourni par libc6-udeb

• dep: libftdi1-2 (>= 1.2)

  C Library to control and program the FTDI USB controllers

• dep: libjaylink0 (>= 0.3.1)

  library for interacting with J-Link programmers

• dep: libpci3 (>= 1:3.13.0)

  utilitaires PCI – bibliothèque partagée

• dep: libusb-1.0-0 (>= 2:1.0.22)

  bibliothèque de programmation de l'USB en espace utilisateur

Télécharger libflashrom1

Télécharger pour toutes les architectures proposées

Architecture	Taille du paquet	Espace occupé une fois installé	Fichiers
ppc64 (portage non officiel)	159,5 ko	986,0 ko	[liste des fichiers]