Paquet : qrouter (1.4.71-2)

[ Paquet source : qrouter  ]

Multi-level, over-the-cell maze router

Qrouter is a tool to generate metal layers and vias to physically connect together a netlist in a VLSI fabrication technology. It is a maze router, otherwise known as an "over-the-cell" router or "sea-of-gates" router. That is, unlike a channel router, it begins with a description of placed standard cells, usually packed together at minimum spacing, and places metal routes over the standard cells.

Qrouter uses the open standard LEF and DEF formats as file input and output. It takes the cell definitions from a LEF file, and analyzes the geometry for each cell to determine contact points and route obstructions. It then reads the cell placement, pin placement, and netlist from a DEF file, performs the detailed route, and writes an annotated DEF file as output.

Autres paquets associés à qrouter

• dep: libc6 (>= 2.29)

  bibliothèque C GNU : bibliothèques partagées
  un paquet virtuel est également fourni par libc6-udeb

• dep: libtcl8.6 (>= 8.6.0)

  Tcl (the Tool Command Language) v8.6 - run-time library files

• dep: libtk8.6 (>= 8.6.0)

  Tk toolkit for Tcl and X11 v8.6 - run-time files

• dep: libx11-6

  bibliothèque X11 partie client

• dep: tkcon

  console interactive perfectionnée pour le développement en Tcl

Télécharger qrouter

Télécharger pour toutes les architectures proposées

Architecture	Taille du paquet	Espace occupé une fois installé	Fichiers
s390x	117,6 ko	327,0 ko	[liste des fichiers]