Paketti: libflashrom1 (1.4.0-3) [debports]

[ Source:  ]

Identify, read, write, erase, and verify BIOS/ROM/flash chips - library

flashrom is a tool for identifying, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware/optionROM images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips.

It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32/40/48, and BGA chips, which use various protocols such as LPC, FWH, parallel flash, or SPI.

The tool can be used to flash BIOS/firmware images for example -- be it proprietary BIOS images or coreboot (previously known as LinuxBIOS) images.

It can also be used to read the current existing BIOS/firmware from a flash chip.

This package provides flashrom library development files.

Muut pakettiin libflashrom1 liittyvät paketit

• dep: libc6 (>= 2.33)

  GNU-C-kirjasto: jaetut kirjastot
  myös näennäispaketti, jonka toteuttaa libc6-udeb

• dep: libftdi1-2 (>= 1.2)

  C Library to control and program the FTDI USB controllers

• dep: libjaylink0 (>= 0.3.1)

  library for interacting with J-Link programmers

• dep: libpci3 (>= 1:3.13.0)

  PCI utilities (shared library)

• dep: libusb-1.0-0 (>= 2:1.0.22)

  userspace USB programming library

Imuroi libflashrom1

Imurointi kaikille saataville arkkitehtuureille

Arkkitehtuuri	Paketin koko	Koko asennettuna	Tiedostot
x32 (epävirallinen siirros)	203.9 kt	929.0 kt	[tiedostoluettelo]